Screen Printing Kit 1 Colour A3 mega kit

£220.00

Out of stock

Share on facebook
Facebook
Share on pinterest
Pinterest
Share on twitter
Twitter

Description

Are you just starting out or upgrading from a Stencil Cut Kit? This kit is ideal for thoses wishing to print more detailed designs. Coating your screen with emulsion and using an exposure unit, saves time on cutting with the knife.

5 Easy steps:
Print your design from your PC onto transparency.
Coat your emulsion and wait for it to dry. (a small domestic fan heater helps)
Expose your image using the Exposure unit in this kit. (You will need a sheet of glass bigger than your image)
Wash your image out
Ready to print!

The ink provided in the waterbased kit is an air drying ink. Simply leave to dry or use a hairdryer and then iron over your print to make it wash proof.

KIT INCLUDES:
•1 Colour printing press with A3 platten board
•1 x UV Lamp Exposure bulb (lamp not incl)
•1 x Screen A3 Size with new 43T mesh
•1 x 12″ Aluminium Coating Trough (to coat the screen with the emulsion)
•1 x 12″ Wooden Squeegee with new blade (to print your image)
•5 x A4 Film to make your positives (to create your transparencies from your PC)
•1 Roll of masking Tape (for taping/masking the edges of your screen)
•6 Mixing Sticks (for mixing your ink)
•1 Kilo of 2-Part Emulsion (to coat your screen and create your stencil)
1 x Scrub Pad
6x 280ml Waterbased inks:
Opaque White, RED, BLUE, GREEN, YELLOW, BLACK

Description / Features / Specifications:
•Complete with Adustable Printing Board 19.7″ *15.8″ (50*40cm)
•Printing board arm is adjustable left to right.
•Holds Screen Frame up to 3 inches deep.
•Two Adjustable hand wheels for screen stability.
•Strong and robust
•Two Springs and tension adjusters for ease of screen elevation.
•Accurate positioning and good quality prints.
•Print onto t-shirts / pillow cases / fabric/ paper / other flat products.
•Printing board is adjustable and so can be changed to hold various other sizes boards.
•Stainless Steel made, convenient in cleaning and no rust.
•Installation video and manual instruction included.

Please Note: This is a made to order item, please allow 1 week for delivery.

Including Screen Reclaiming kit.
content.
100ml of concentrate emulsion remover dilute with water 1-10. Will remove most screen printing stencil emulsions in the marketplace.
How to use instructions , dilute with water. wet screen on both sides with water. Apply Emulsion Remover with a damp cloth on both sides . Leave to soak for 3 mins. Then pressure wash off.
100ml of concentrate Degreaser wetting agent dilute with water 1-10.
How to use instructions , dilute with water. wet screen on both sides with water. Apply degreaser with a damp cloth and work into screen on both sides. Rinse off and dry ready for your next image to be applied
100ml of solvent Screen Wash. to remove plastisol ink and opaque Water based ink residue.
How to use instructions. Card off all remaining ink off the Silk screen. For Plastisol and solvent inks ,soak a small rag with screen wash and wipe all the ink off, allow screen to dry.
Water based ink scrape off, and place back in the pot. Wash screen down with water, under tap or hose. allow to dry then dab screen wash on a dry rag . Wipe off ink residue applying circular motions. leave screen to dry.
150ml of haze paste image ghosting remover, for removing ink stains from the Silkscreen Mesh. for stubborn stains increases the strength when used with screen wash.
How to use instructions. When the ink is off,and the emulsion is off, but you can still see a ghosting image of your design still on your mesh. While the screen is wet using a nail brush rub hase paste into the ghost image on both sides of your screen printing screen, leave for 10 mins then power wash off. For stubborn GHOSTING, apply Screen wash while the screen is still wet until the ghosting fades away.
For health and safety you must wear eye protection and gloves when using this kit. Always keep out of the reach from children.

Related Products